An Easy Dollar Bill Test Can Reveal There’s a Draft Around Your Door

How to check the seal
Hold a dollar bill against the door frame, close the door, and give the bill a gentle pull. To check beneath the door, slide the bill underneath before closing it, then tug.
If it comes out without dragging, the U.S. Department of Energy says energy may be escaping; the Good Housekeeping Institute describes this as a significant air leak. A standard piece of paper can substitute for a dollar bill.
Check several spots because the door may fit tightly in one area but have a gap elsewhere. The DOE says the same test can be used on windows.
Try a flashlight check
For another way to look for leaks, the Good Housekeeping Institute suggests testing at night with a flashlight. Have someone shine it toward the door and window frames from one side. If light is visible from the other side, there may be a gap letting air through.
Seal gaps around the frame
Weatherstripping is suited to gaps around the frame. The DOE recommends covering the entire door jamb with continuous strips along both sides, fitted closely together at the corners.
Choose a thickness that presses firmly between the door and jamb. Apply the strips to a clean, dry surface when temperatures are above 20°F; they should compress when the door closes.
Block drafts beneath doors
A draft stopper can help keep cold air from entering under a door, according to the Good Housekeeping Institute. It may be more noticeable than other fixes, but it offers a quick option. Choices include a weighted cloth stopper that rests on the floor or a plastic guard that fits around the door.
Key points
- A dollar bill or standard paper can test for gaps around a door.
- Test several places along the frame and beneath the door.
- A flashlight check at night can help identify leaks.
- Weatherstripping and draft stoppers can help block drafts.

